Gallery

Images: HSV WM Grange (2007-13)

Images: HSV WM Grange (2007-13)

Released in May 2007, the HSV WM Series I (WM.I) Grange was a rear-wheel drive, long wheelbase sedan. Manufactured in Elizabeth, South Australia, and finished by HSV in Clayton, Victoria, the WM Grange was initially powered by 6.0-litre LS2 V8 petrol engines that were mated to six-speed 6L80E automatic transmissions. In April 2008, however, the 6.0-litre LS2 V8 engine was replaced by the more powerful 6.2-litre LS3 V8… Read full HSV WM Grange review

Images: HSV WM.II Grange (2009-10)

Released in September 2009, the HSV WM Series II (WM.II) Grange introduced improved fuel economy and additional features. Specifically, the electronic stability control system gained a ‘Competition Mode’ and the ‘Extended Cruise Control’ system included a speed-limiting function for downhill driving.

Images: HSV WM.III Grange (2010-13)

Released in September 2010, the HSV WM Series III (WM.III) Grange introduced a more powerful engine, updated interior and revised styling. The WM.III Grange was fitted with the 6.2-litre V8 previously reserved for the GTS, resulting in a power increase of 8kW. The V8 engine was also available with a dual-fuel liquid propane injection (LPI) system which provided identical performance to the petrol-only V8. The LPI engine would start on petrol but switch to LPG for low and mid-range driving; from approximately 5300rpm – depending on conditions – the engine would revert to petrol for full power. The HSV WM.III Grange could be identified by its revised front mask with daytime LED running lights. Inside, the E.III Grange was fitted with a new ‘Oracle’ dashboard with binnacle gauges and piano black trim on the centre console and steering wheel; there was also an ‘Enhanced Driver Interface’ with a touch-screen display that could provide performance data.


Back To Top