Recalls & faults: Hyundai QX Venue (2019-on)

Recalls: Hyundai QX Venue

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Hyundai QX Venue

2019 Hyundai QX Venue: loose wheel nuts

In November 2019, recall campaign 91C064 was issued for Hyundai Venue vehicles that were available for sale in Australia from 1 July 2019 to 31 August 2019. The wheel nuts for these vehicles may not have been tightened correctly and this could cause the wheels to become loose and risk falling off. If this occurred, the steering and drivability of the vehicle would be compromised – this increased the risk of a collision and injury to vehicle occupants and other road users. For the VINs of the recalled vehicles, please see PRA 2019/17928.

Problems and faults: Hyundai QX Venue

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.