Recalls: MG6
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: MG6
- In July 2014, a recall was issued for MG6 vehicles because the rear centre seat position was not fitted with a child restraint anchorage as required by Australian Design Rule 34/02. Without an appropriate child restraint anchorage, the top tether of a child restraint could not be attached and this would increase the risk of injury to an occupant in a severe accident (PRA 2014/14198). The VINs of the recalled vehicles were as follows:
- LSJW24G97BS092004;
- LSJW24G95CS085330;
- LSJW24G90CS035600;
- LSJW24G97CS085295;
- LSJW24G90CS085266;
- LSJW24G9XCS085307;
- LSJW24G91CS085311;
- LSJW26G96CS085316;
- LSJW26G93CS085306;
- LSJW26G95CS085260;
- LSJW26G99CS035834; and,
- LSJW24G97CS085300.
Problems and faults: MG6
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: MG6
No troubleshooting information is currently available for the MG6.
