Recalls: Nissan Y62 Patrol
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Nissan Y62 Patrol
- In December 2014, a recall was issued for Nissan Y62 Patrol vehicles that had VINs in the range JN1 TANY62A 0000010 to JN1 TANY62A 0010001. In these vehicles, the fuel pressure sensor may be insufficiently tightened to the fuel rail, and may loosen gradually due to heat and vibration of the engine. In some cases, fuel may leak between the fuel pressure sensor and the fuel rail. If the latter occurred in the presence of an external ignition source, a fire could result (PRA 2014/14464).
Problems and faults: Nissan Y62 Patrol
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Nissan Y62 Patrol
No troubleshooting information is currently available for the Nissan Y62 Patrol.
