Recalls: Peugeot A9 208
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Peugeot A9 208
- In June 2014, a recall was issued for Peugeot 208 vehicles because mounting/fixing bolts for the front suspension wishbone may not be the correct specification. As a result, parts may break and pose an accident risk to vehicle occupants and other road users. For a list of the VINs of affected vehicles, please see PRA 2014/14184.
Problems and faults: Peugeot A9 208
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Peugeot A9 208
No troubleshooting information is currently available for the Peugeot A9 208.
