Recalls: Peugeot T9 308 Hatch
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Peugeot T9 308 Hatch
Peugeot T9 308 Hatch: front suspension bolts could break
In March 2016, a recall was issued for Peugeot T9 308 Hatch vehicles because the front suspension wishbone mounting bolts may not meet specifications and could break – if this occurred, the loss of directional control could pose an accident hazard to the driver and other road users (PRA 2016/15247).
Peugeot T9 308 Hatch: manufacturing flaw for door locks
In June 2016, a recall was issued for Peugeot T9 308 Hatch vehicles because a manufacturing flaw for the door locks could cause the internal mechanism of one or more locks to jam – this could prevent one or more of the doors from closing, or expose them to unexpected unlocking and opening. If the door lock(s) were to fail, they could cause injury to a third party or increase the risk of injury to occupants inside the vehicle. For the VINs of the recalled Peugeot 308 vehicles, please see PRA 2016/15441.
2014 Peugeot T9 308: potential fuel leak
In July 2016, a recall was issued for Peugeot T9 308 vehicles that were manufactured from 15 January 2014 to 12 June 2014. In these vehicles, the fuel injector supply rail could develop a leak that causes a drop in fuel pressure – this could affect the operation of the stop/start system. In extreme cases, the engine may not restart and petrol could be sprayed over hot areas in the engine bay, posing a fire hazard. For the VINs of the recalled vehicles, please see PRA 2016/15567.
2015 Peugeot T9 308 Hatch: front wishbone bolts may break
In June 2017, a recall was issued for Peugeot T9 308 vehicles that were available for sale in Australia from 2 January 2015 to 31 January 2015. In these vehicles, the front wishbone bolts may not be to the correct specification and may break. If this occurred, the wheels could tilt and the driver may experience reduced steering control – this would pose a hazard to the driver and other road users. For the recalled vehicles, replacement bolts were to be installed. For the VINs of the recalled Peugeot T9 308 vehicles, please see PRA 2017/16142.
2014-17 Peugeot T9 308 Hatch: short circuit and fire hazard
In July 2017, a recall was issued for Peugeot T9 308 Hatch vehicles that were available for sale prior to 31 March 2017. In these vehicles, the 12 volt connection lug for the starter motor may have been fitted incorrectly such that it could contact a metal component and cause a short circuit, posing a fire hazard. For the VINs of the recalled Peugeot T9 308 Hatch vehicles, please see PRA 2017/16180.
2014-15 Peugeot T9 308 Hatch: engine may overheat and seize
In March 2018, a recall was issued for Peugeot T9 308 vehicles that were available for sale from 1 November 2014 to 30 April 2015. In these vehicles, the cooling strategy and maximum temperature alert could cause the engine to overheat. If the engine seized while the vehicle was being driven, the vehicle could stop suddenly, posing a collision hazard for vehicle occupants and other road users. For the VINs of the recalled Peugeot T9 308 Hatch vehicles, please see PRA 2018/16632.
2017-18 Peugeot T9 308 Diesel: engine may overheat
In August 2018, a recall was issued for Peugeot T9 308 vehicles that had diesel engines and were available for sale in Australia from 1 September 2017 to 1 May 2018. In these vehicles, the cooling strategy and maximum temperature alert could cause the engine to overheat. If the engine overheated and the engine seized while the vehicle was being driven, the vehicle could stop suddenly such that it would pose a collision risk for vehicle occupants and other road users. For the VINs of the recalled vehicles, please see PRA 2018/16948.
Problems and faults: Peugeot T9 308 Hatch
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Peugeot T9 308 Hatch
No troubleshooting information is currently available for the Peugeot T9 308 Hatch.
