Engines

1FZ-FE Toyota engine

Introduction

The 1FZ-FE was a 4.5-litre inline six-cylinder petrol engine that replaced Toyota’s 3F-E engine. The 1FZ-FE engine had a cast iron block with 100.0 mm bores and a 95.0 mm stroke for a capacity of 4477 cc.

  Engine Trans. Years Peak power Peak torque
Toyota105 Series LandCruiser (FZJ105) 4.5-litre petrol I6
(1FZ-FE)
5sp man.,
4sp auto
1998-02 165kW at 4600rpm 387Nm at 3600rpm


The 1FZ-FE engine had a cast iron cylinder head and double overhead camshafts. The intake camshaft was driven by a single roller chain, while the exhaust camshaft was driven by a scissor gear off the intake camshaft. The 1FZ-FE engine had four valves per cylinder – in a cross-flow layout – that were actuated by outer pad type valve lifters with adjusting shims. As per the table below, the 1FZ-FE engine had valve overlap of 10 degrees, intake duration of 225 degrees and exhaust duration of 225 degrees.

1FZ-FE Valve Timing
Intake Open 5° BTDC
Close 40° ABDC
Exhaust Open 40° BBDC
Close 5° ATDC
The 1FZ-FE engine had sequential, electronic fuel injection with direct ignition. Furthermore, the 1FZ-FE engine had pentroof type combustion chambers and a compression ratio of 9.0:1; the firing order was 1-5-3-6-2-4.


Back To Top