Overview

Recalls are issued for defects or faults which have the potential to cause injury. Manufacturers or importers seek to inform the original buyer if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. However, manufacturers or importers may not have the contact details of subsequent owners. Please note that the recalls below are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Mazda KK CX-90

2023 Mazda KK CX-90: loss of power steering assistance

In January 2024, recall campaign R202401 was issued for 2023 Mazda KK CX-90 vehicles. Due to a manufacturing defect, the gear set within the power steering assembly may not operate as intended. As a result, the driver could experience unexpected increased steering effort. Unexpected increased steering effort, if it occurred whilst driving, could increase the risk of a collision and injury to both vehicle occupants and other road users. For the VINs of the recalled vehicles, please see REC-005882.

2023 Mazda KK CX-90: autonomous braking falsely activated

In May 2024, recall campaign R202404 was issued for 2023 Mazda KK CX-90 vehicles. Due to a calibration issue within the Vehicle Control Module (VCM) and when driving at low speeds, the vehicle may falsely detect reflective objects such as metal walls, barriers or similar objects on the side of the road as an approaching object. This could trigger an unintended brake activation that increased the risk of a collision and injury to both vehicle occupants and other road users. To fix, the Vehicle Control Module was to be updated with a revised calibration by a Mazda Dealer. For the VINs of the recalled vehicles, please see REC-005973.

2023-24 Mazda KK CX-90 Diesel: no drive when accelerator pedal depressed

In August 2024, recall campaign 202405 was issued for 2023-24 Mazda KK CX-90 vehicles with diesel engines. Due to a software issue in the transmission control module, if the brake pedal was firmly depressed to stop the vehicle, the clutch for the engine and electric motor may remain disengaged during deceleration. If this occurred, power from the engine or electric motor may not be transmitted when the accelerator pedal was depressed. This condition could increase the risk of injury to vehicle occupants and other road users. To fix, a Mazda dealer was to upgrade the calibration for the transmission control module. For the VINs of the recalled vehicles, please see REC-006046.

Problems and faults: Mazda KK CX-90

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Problems and faults: Mazda KK CX-90

No troubleshooting information is currently available for the Mazda KK CX-90.