Recalls: Audi 8VS RS 3 Sedan
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Audi 8VS RS 3 Sedan
2017 Audi 8VS RS 3 Sedan: rear hub carriers may fail
In November 2017, a recall was issued for Audi 8VS RS 3 vehicles that were manufactured in August 2017. In these vehicles, a fault in the manufacturing process for the rear hub carriers caused a discrepancy in material hardness. As a result, bolted connections to the hub carriers could become detached or the hub carriers could fail – this could cause the driver to lose control of the vehicle, posing a collision risk to vehicle occupants and other road users (PRA 2017/16447).
2018 Audi 8VS RS 3 Sedan: rear head restraints may not be mounted properly
In January 2019, recall campaign 72H9 was issued for Audi 8VS RS 3 Sedans that were manufactured between week 22 and week 31 in 2018. In these vehicles, the mountings for the rear head restraints were not correctly welded to the outer backrest frame. The support and protection functions of the head restraint may therefore be restricted in the event of a collision and this increased the risk of serious injury to the occupants. As part of the recall, the rear back rest frames were to be checked and, if required, the rear seat bench was to be replaced. For the VINs of the recalled vehicles, please see PRA 2018/17242.
2018 Audi 8VS RS 3 Sedan: rear head restraint may detach
In May 2019, recall campaign PRA 72I8 was issued for Audi 8VS RS 3 Sedans that were manufactured between April 2018 and June 2018. Due to a processing error, the locking pin which secured the rear head restraint may have been omitted from individual head restraints for the rear centre seat. If the centre seat was occupied and a collision occurred, the restraint may detach from the guide pines – this would increase the risk of injury to the passenger in this seat as the support and protection functions of the head restraint may not perform as expected. For the VINs of the recalled vehicles, please see PRA 2019/17561.
Problems and faults: Audi 8VS RS 3
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Audi 8VS RS 3 Sedan
No troubleshooting information is currently available for the Audi 8VS RS 3 Sedan.
