Recalls: Audi C4 100
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Audi C4 100
- In February 1993, a recall was issued for Audi C4 100 vehicles due to potential brake failure if the vacuum system was not modified. The affected vehicles were in the VIN range WAU ZZZ 4AZMM 011549 to WAU ZZZ 4AZNN 058208 (PRA 1993/1833).
Problems and faults: Audi C4 100
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Audi C4 100
- Driving with less than 12 litres of fuel in the tank may cause the malfunction indicator to illuminate due to a lean misfire.
- The fuel gauge may provide inaccurate readings due to a loose earth wire at the left taillight.
