Recalls

Recalls & faults: Audi C5 RS6 (2003-04)

Recalls: Audi C5 RS6

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally. 

Recalls: Audi C5 RS6

No recall information is available for the Audi C5 RS6. To search for recalls of Audi models, please visit Product Safety Recalls Australia: Audi.


Problems and faults: Audi C5 RS6

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Audi C5 RS 6: Dynamic Ride Control (DRC) failure

For the Audi C5 RS 6, the Dynamic Ride Control (DRC) dampers may leak fluid from the cross-linked circuits, thereby compromising handling and ride quality; some owners experienced serious DRC failure while driving at highway speeds. Furthermore, some owners have experienced multiple DRC failures, resulting in many replacing system with more durable aftermarket coil-over suspension.

In February 2009, Audi USA announced customer service action 43A8/J4 to replace all four DRC shock absorbers with improved units which had a redesigned seal package and shaft guide bushings; the central valves were also to be replaced. Like the original shock absorbers, the improved units were produced by Kayaba Industry (also known as KYB) and the service action was initiated in August 2009 when parts became available.

As part of the service action, owners could request reimbursement for previous costs incurred on DRC repairs.


Back To Top