Recalls: BMW F48 X1
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: BMW F48 X1
BMW F48 X1: front passenger airbag may not deploy
In May 2017, a recall was issued for BMW F48 X1 vehicles that were available for sale in Australia from 1 June 2016 to 30 April 2017. During production of the dashboard panel, the process of milling the deployment points in the passenger side panel had not been carried out. As a result, the front passenger airbag may not deploy correctly in the event of a collision, increasing the risk of injury to the front passenger. For the VINs of the recalled BMW F48 X1 vehicles, please see PRA 2017/16057.
Problems and faults: BMW F48 X1
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use theContact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: BMW F48 X1
No troubleshooting information is currently available for the BMW F48 X1.
