Recalls: BMW G01 X3
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: BMW G01 X3
2017-18 BMW G01 X3: air trapped in hydraulic braking system
In August 2018, a recall was issued for BMW G01 X3 vehicles that were available for sale in Australia from 15 April 2018 to 27 June 2018. In these vehicles, air could be trapped in the hydraulic braking system and cause extended brake pedal travel during braking. In some cases, the rear brake circuit could fail or, in extreme circumstances, the brake pedal may travel to the floor – both occurrences would increase the risk of a collision. For the VINs of the recalled vehicles, please see PRA 2018/16930.
2018-19 BMW F97 X3 M: steering track rods may break
In July 2020, recall campaign 00 32 1403 00 was issued for BMW F97 X3 M vehicles that were available for sale in Australia from 27 September 2018 to 1 August 2019. Exposure to high temperatures and vibrational loads could cause the steering track rods in these vehicles to be damaged. If the steering track rods were damaged or broken, steering ability would be impaired such that the vehicle may not steer as expected – this increased the risk of a collision and, in turn, the risk of injury and death. For the VINs of the recalled vehicles, please see PRA 2020/18396.
2019-20 BMW G01 X3: front seatbelts
In November 2020, recall campaign 00 72 2102 00 was issued for BMW G01 X3 vehicles that were available for sale in Australia from 6 December 2019 to 5 August 2020. In these vehicles, the front seatbelts (driver’s and passenger’s side) may not have been screwed to the correct specification. If the seatbelts were not secured, the risk of a collision and the severity of injuries could be increased. For the VINs of the recalled vehicles, please see PRA 2020/18586.
2017-20 BMW G01 X3: potential engine failure
In March 2022, recall campaign 0013590300 was issued for 2017-20 BMW G01 X3 vehicles. In these vehicles, a software update issue may lead to an engine failure whilst driving and a red Check Control message ‘Drive faulty’ may also appear. The engine failure could cause a sudden loss of power – this increased the risk of a collision and injury for vehicle occupants and other road users. For the VINs of the recalled vehicles, please see REC-005304.
Problems and faults: BMW G01 X3
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: BMW G01 X3
No troubleshooting information is currently available for the BMW G01 X3.
