Recalls: Fiat 500C
Overview
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Fiat 500C
2019 Fiat 500C 1.2 8V: front axle may break
In May 2019, recall campaign 6228 was issued for Fiat 500C 1.2 8V vehicles that were available for sale from 26 February 2019 to 22 May 2019. Due to a non-conformity in the production process, the front drive axle may break. If this occurred while the vehicle was being driven, the potential for a collision posed a hazard for occupants and other road users. For the VINs of the recalled vehicles, please see PRA 2019/17572.
Problems and faults: Fiat 500C
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Fiat 500C
No troubleshooting information is currently available for the Fiat 500C.
