Recalls & faults: Ford Mk.5 Laser (1999-02)

Recalls: Ford Mk.5 Laser

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Ford Mk.5 Laser

In January 2001, a recall was issued for Ford KN Lasers due to possible damage to the surface of the left-hand rear flexible brake hose – if left unattended, this could potentially result in brake failure (PRA 2001/4622).
In February 2001, a recall was issued for KN Lasers due to the compliance plate being stamped with the incorrect date format for February 2001 (PRA 2001/4649).

Problems and faults: Ford Mk.5 Laser

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.