Recalls & faults: Holden Trailblazer (2016-20)

Recalls: Holden Trailblazer

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Holden Trailblazer

Holden Trailblazer: label to be fitted to vehicle jack

In June 2017, a recall was issued for Holden Trailblazer vehicles because certain vehicle jacks that were sold by Holden Service Parts Organisation (HSPO) as service replacements were not fitted with the required AS/NZ2693 label; this label was necessary to describe the safe and correct usage of the jack. Furthermore, incorrect use of the vehicle jack could result in serious injury. As part of the recall, a label was to be fitted to the vehicle jack assembly (PRA 2017/16099).

Problems and faults: Holden Trailblazer

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.