Recalls: Honda FK2 Civic Si
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Honda FK2 Civic Si
No recall information is available for the Honda Civic Si (FK2: 2009-11). To search for recalls of Honda models, please visit Product Safety Recalls Australia: Honda.
Problems and faults: Honda FK2 Civic Si
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Honda FK2 Civic Si
- Rattling noises from the front of the Civic Si when going over bumps may be due to defective liquid-filled engine mounts; an improved replacement component was subsequently released.
- For Honda Civic Si models with automatic transmissions, the brakes could feel stiff when first starting in cold weather – this could be remedied by replacing the brake booster.
- The ‘check engine’ light may illuminate due to a malfunction of the air/fuel sensor – this sensor may get wet from moisture in the exhaust system, requiring it to be replaced.
- A faulty occupant position sensor in the front passenger seatback could cause the ‘SRS’ (airbag) light to stay on.
- If the battery is drained and the car is jump-started with the security system set, the engine will not start and the immobiliser light will blink.
- If water enters the position switch for the door lock, the remote central locking may not work.
- The power windows may malfunction due to failure of the master switch in the driver’s door.
- The windscreen wipers may not turn off when parked, especially in cold weather, due to problems with the windscreen wiper motor.
