Recalls: Hyundai DM Santa Fe
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Hyundai DM Santa Fe
Hyundai DM Santa Fe 2.4 GDi: debris contamination and engine failure
In June 2017, a recall was issued for Hyundai DM Santa Fe vehicles which had 2.4 GDi engines. During the assembly of engine units, debris contamination may have occurred. As such, prolonged running of the engine with contaminants could cause engine failure – this would cause the vehicle to stop suddenly and increase the risk of a collision. For the VINs of the recalled vehicles, please see PRA 2017/16129.
2012-16 Hyundai DM Santa Fe: bonnet could lift while driving
In August 2017, a recall was issued for Hyundai DM Santa Fe vehicles that were available for sale from 2 April 2012 to 1 July 2016. In these vehicles, the secondary bonnet latch cable could corrode and fail to engage the secondary latch and the bonnet could lift while the vehicle was in motion – this could impair the driver’s visibility, posing a hazard to vehicle occupants and other road users. For the VINs of the recalled Hyundai DM Santa Fe vehicles, please see PRA 2017/16237.
2017 Hyundai DM Santa Fe: loss of steering control
In April 2018, a recall was issued for Hyundai DM Santa Fe vehicles that were available for sale in Australia from 15 June 2017 to 28 December 2017. In these vehicles, the steering wheel assembly could separate from the steering column while the vehicle was being driven – this would cause a loss of steering control and increase the risk of a collision. For the recalled vehicles, the steering wheel hub was to be inspected and, if defective, replaced. For the VINs of the recalled Hyundai DM Santa Fe vehicles, please see PRA 2018/16693.
Problems and faults: Hyundai DM Santa Fe
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Hyundai DM Santa Fe
No troubleshooting information is currently available for the Hyundai DM Santa Fe.
