Recalls

Recalls & faults: Mazda DL Mazda2 (2015-on)

Recalls: Mazda DL Mazda2 sedan

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Mazda DL Mazda2

2015-16 Mazda DL Mazda2: potential fire hazard

In July 2016, a recall was issued for Mazda DL Mazda2 vehicles that were available for sale from 30 January 2015 to 16 February 2016. In affected vehicles, the welding between the fuel tank and rollover valve (ROV) could peel off, causing a fuel leak. In the presence of an ignition source, the fuel leak posed a fire hazard for vehicle occupants and other road users. The VINs of the recalled Mazda DL Mazda2 vehicles were in the range MM0 DL2HA* 0W 111420 to MM0 DL2HA* 0W 116874; a list of the VINs is accessible at PRA 2016/15547.

2016-18 Mazda DL Mazda2 sedan: unexpected movement when parking brake applied

In February 2018, a recall was issued for Mazda DL Mazda2 sedans that were available for sale from 28 April 2016 to 31 January 2018. In these vehicles, the shape of the teeth on the parking brake sector gear may not meet specification. As such, engagement between the sector gear and ratchet could be suddenly lost when the parking brake was applied – this could cause unexpected movement of the vehicle if parked on a slope. The recalled Mazda DL Mazda2 sedans had VINs in the range MM0DL2SA*0W 201548 to MM0DL2SA*0W 314753; for the complete list, please see PRA 2018/16586.

2018-19 Mazda DL Mazda2 Sedan: potential fuel leak

In September 2019, recall campaign R201910 was issued for Mazda DL Mazda2 Sedans that were available for sale from 30 July 2018 to 21 June 2019. In these vehicles, the fuel tank may exceed the specified manufacturing dimensions – this could place additional strain on the fuel tank restraining strap such that it could weaken or break. If this occurred, the fuel tank could move out of position and fuel could leak – this posed a fire hazard and increased the risk of injury to other road users. For the VINs of the recalled vehicles, please see PRA 2019/17817.


Problems and faults: Mazda DL Mazda2 sedan

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Problems and faults: Mazda DL Mazda2

No troubleshooting information is currently available for the Mazda DL Mazda2.


Back To Top