Recalls: Mazda GL Mazda6
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Mazda GL Mazda6
2018-19 Mazda GL Mazda6 2.5 SkyActiv-G: intake valve rocker arm damage
In July 2019, a recall was issued for Mazda GL Mazda6 vehicles that had 2.5-litre ‘SkyActiv-G’ petrol engines and were available for sale from 16 February 2018 to 11 May 2019. In these vehicles, software for the Powertrain Control Module (PCM) which controlled the cylinder deactivation function may not operate correctly. The intake valve rocker arm could therefore move out of position and make contact with other internal engine parts. If this occurred, the engine may lower power stall, the engine would not restart and the malfunction indicator light would illuminate. To fix, the PCM was to be re-programmed. For the VINs of the recalled vehicles, please see PRA 2019/17672.
2012-18 Mazda GJ/GL Mazda6 Diesel: carbon deposits in intake shutter valve
In October 2019, recall campaign R201912 was issued for 2012-18 model year Mazda GJ and GL Mazda6 vehicles that had diesel engines and were available for sale in Australia from 26 January 2012 to 10 August 2018. In these vehicles, carbon deposits may accumulate in the intake shutter valve and engine components may experience premature wear. These factors could cause the following symptoms:
- Gradual decrease in engine power;
- Illumination of multiple warning lights in the driver’s instrument cluster;
- A gradual increase in vehicle stopping distance;
- Potential engine stall with no re-start; and,
- Emission of smoke from the engine compartment.
If any of these occurred, there was an increased risk of a collision or injury to vehicle occupants and other road users. To fix, affected engine components were to be inspected, repaired and, where required, replaced; the Engine Control Module (ECM) was also to receive a software update. For the VINs of the recalled vehicles, please see REC-000894.
2017-19 Mazda GL Mazda6 vehicles: low pressure fuel pump could deform and cause stall
In December 2021, recall campaign R202104 was issued for 2017-19 Mazda GL Mazda6 vehicles. The low pressure fuel pump impeller could become deformed and cause the fuel pump to stop working. This could cause the vehicle to stall and this loss of power while driving could increase the risk of a collision and injury to vehicle occupants and other road users. To fix, the low pressure fuel pump was to be replaced. For the VINs of the recalled vehicles, please see REC-005009.
Problems and faults: Mazda GL Mazda6
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Mazda GL Mazda6
No troubleshooting information is currently available for the Mazda GL Mazda6.
