Recalls: Mazda HD 929
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Mazda HD 929
Mazda HD 929: ignition switch fire hazard #1
In October 2015, a recall was issued for Mazda HD 929 vehicles. In these vehicles, an excessive amount of grease may have been applied to the electrical contacts inside the ignition switch. Due to a heat from the electric arc that was generated during switch operation, the grease may carbonise and subsequently accumulate between the electrical contacts (moving contact and fixed contact), thereby reducing the electrical insulation performance inside the switch. Over time, the path between the electrical contacts may become conductive, causing heat, potentially smoke and, at worst, a fire (PRA 2015/14997). The recalled Mazda HD 929 vehicles had VINs in the following ranges:
- JM0HD10E100104994 to JM0HD10E100110265; and,
- JM0HD10E200100006 to JM0HD10E100100728.
Mazda HD 929: ignition switch fire hazard #2
In December 2016, Mazda issued a recall for Mazda HD 929 vehicles. In these vehicles, an excessive amount of grease may have been applied to the electrical contacts inside the ignition switch. This grease could carbonise due to heat from an electric arc that was produced during switch operation. Furthermore, the carbonised grease could accumulate between the electrical contacts and reduce the electrical insulation performance inside the switch. If the vehicle continued to be driven in this condition, the path between the electrical contacts could become conductive, producing heat, smoke and, at worst, a fire (PRA 2015/14997). The recalled Mazda HD 929 vehicles had VINs in the following ranges:
- JM0HD10E100104994 to JM0HD10E100110265; and,
- JM0HD10E200100006 to JM0HD10E100100728.
Problems and faults: Mazda HD 929
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Mazda HD 929
No troubleshooting information is currently available for the Mazda HD 929.
