Recalls & faults: Mercedes X218 CLS 63 Shooting Brake (2012-14)

Recalls: Mercedes X218 CLS 63 AMG

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Mercedes X218 CLS 63 AMG Shooting Brake

In March 2015, a recall was issued for Mercedes-Benz X218 CLS Shooting Brake vehicles that were available for sale from 1 July 2012 to 1 December 2014. In these vehicles, the seal on the secondary bulkhead in the engine compartment could come loose and partially fall into the engine compartment. In extreme cases, the seal may come in contact with hot engine components and pose a fire risk (PRA 2015/14588).

Problems and faults: Mercedes X218 CLS 63 AMG Shooting Brake

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.