Recalls

Recalls & faults: Mitsubishi MQ Triton Cab Chassis (2015-on)

Recalls: Mitsubishi MQ Triton Cab Chassis

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Mitsubishi MQ Triton cab chassis

Mitsubishi MQ Triton: incorrect towing loads

In November 2015, a recall was issued for Mitsubishi MQ Triton cab chassis vehicles that were fitted with Genuine Accessory tow bar kits with the part numbers MZ350452 and MZ350552. For these vehicles, the compliance label did not comply with the requirements in ADR 62/02 or AS4177.1 since the towing loads did not match the specifications for the MQ Triton cab chassis. As a result, the user may exceed the specified towing loads in the Owner’s Manual, posing a potential safety hazard (PRA 2015/15064).

Mitsubishi MQ Triton: towbar could detach

In March 2016, a recall was issued for Mitsubishi MQ Triton utilities that were fitted with a genuine Mitsubishi towbar because the fitted flange head bolts may loosen in use. If the bolts became loose, the towbar could detach from the vehicle, creating a safety hazard (PRA 2016/15281).

2015-19 Mitsubishi MQ/MR Triton with genuine accessory towbar wiring harness

In March 2020, recall campaigns 010164 and 010165 were issued for 2015-19 model year Mitsubishi MR and MR Triton vehicles. Due to incorrect installation, the genuine accessory towbar wiring harness (where fitted) could allow liquids to contact the electrical circuits. As a result, the harness and its surrounds may overheat, burn or catch fire – this posed a risk of injury. For the VINs of the recalled vehicles, please see PRA 2020/18203.


Problems and faults: Mitsubishi MQ Triton cab chassis

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Mitsubishi MQ Triton cab chassis: manual transmission problems

For Mitsubishi MQ Triton cab chassis vehicles with the six speed manual transmission, there have been reports of the transmission slipping out of gear and grinding noises when engaging the first three forward gears. For affected vehicles, Mitsubishi has a transmission repair kit which is understood to have reinforced gear selectors and synchronisers.


Back To Top