Recalls

Recalls & faults: Mitsubishi Outlander PHEV (2014-21)

Recalls: Mitsubishi Outlander PHEV

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Mitsubishi Outlander PHEV

Mitsubishi Outlander PHEV: EV drive mode only and potential loss of power

In May 2017, a recall was issued for 2014 and 2014.5 ‘model year’ Mitsubishi Outlander PHEV vehicles. Due to improper engine software, EV software and spark plug specification, the petrol engine could shut down unexpectedly – this would limit the vehicle to the EV drive mode, with no electric charge by the engine. The EV battery would therefore discharge and the resultant lack of power could increase the risk of a collision. To fix, the recalled vehicles were to have their EV software updated and different spark plugs were to be fitted. The recalled Mitsubishi Outlander PHEV vehicles had VINs in the range JMFXDGG2WEZ000101 to JMFXDGG2WEZ002023 (PRA 2017/16078).

Mitsubishi ZJ Outlander PHEV: could roll away when parked

In February 2018, a recall was issued for Mitsubishi Outlander PHEV vehicles. In these vehicles, improper sealing of the parking brake calliper could allow water ingress such that the parking brake shaft could corrode. As a result, the parking brake may not properly engage and the vehicle may roll away when parked. For some of the recalled vehicles, a defect with the parking brake automatic adjuster (which was to compensate for brake pad wear) could result in the vehicle rolling away when parked. For the VINs of the recalled Mitsubishi ZJ Outlander PHEV vehicles, please see PRA 2018/16623.

2017-18 model year Mitsubishi Outlander PHEV: FCM may apply brakes unnecessarily

In October 2018, a recall was issued for 2017-18 model year Mitsubishi Outlander PHEV vehicles. For the Forward Collision Mitigation (FCM) system, incorrect operation of software could cause the system to apply the vehicle’s brakes even when it was no longer necessary to reduce vehicle speed to avoid or mitigate a collision. The application of the vehicle’s brakes in this manner posed a hazard to any following traffic that was close behind. For the VINs of the recalled vehicles, please see PRA 2018/17095.

2017-18 model year Mitsubishi Outlander PHEV: ASC temporarily disabled

In October 2018, a recall was issued for 2017-18 model year Mitsubishi Outlander vehicles. Incorrect operation of software for the ASC safety system could cause the following features to be temporarily disabled: Adaptive Cruise Control, Forward Collision Mitigation, Brake Auto Hold, Hill Start Assist and Super All-Wheel Control. If this occurred, the risk of a collision would be increased. For the VINs of the recalled vehicles, please see PRA 2018/17096.

2013-15 Mitsubishi Outlander PHEV: engine may stop

In March 2019, recall campaign 010159 was issued for Mitsubishi Outlander PHEV vehicles that were available for sale in Australia from 19 September 2013 to 30 November 2015. In these vehicles, the airflow sensor within the petrol engine could fail – this should be indicated by a deterioration in vehicle performance and illumination of the EV system warning lump. If the EV warning lamp did not illuminate, however, the petrol engine may stop and this would prevent the main battery from being charged such that the vehicle could not be driven. These conditions increase the risk of a collision for vehicle occupants and posed a hazard to other road users. For the VINs of the recalled vehicles, please see PRA 2019/17399.

2019-20 Mitsubishi Outlander PHEV: seatbelt shoulder anchorage incorrectly assembled

In July 2020, recall campaign 010166 was issued for Mitsubishi Outlander PHEV vehicles that were available for sale in Australia from 31 July 2019 to 31 March 2020. In these vehicles, the second-row right-side seatbelt shoulder anchorage was incorrectly assembled and may not restrain the occupant properly. In the event of a collision, improper restraint of the occupant increased the risk of injury or death. For the VINs of the recalled vehicles, please see PRA 2002/18392.

2016 Mitsubishi Outlander PHEV: parking brake may not engage

In January 2021, recall campaign 010167 was issued for Mitsubishi Outlander vehicles that were available for sale in Australia from 23 February 2016 to 30 November 2016. For these vehicles, failure of the anti-rust coating (Fluorine) may allow rust to form on the parking brake shaft. As a result, the parking brake shaft may become stuck and not engage. If the parking brake shaft did not engage when the user shifted into ‘Park’ position, the vehicle could move and this posed a hazard to vehicle occupants, road users and bystanders. For the VINs of the recalled vehicles, please see PRA 2020/18746.

2013-20 Mitsubishi Outlander PHEV: if supplied, non-AGM battery to be replaced

In August 2021, recall campaign 010168 was issued for 2013-20 Mitsubishi Outlander PHEV vehicles. The 12 volt AGM (absorbent glass mat) battery located in the rear of the luggage compartment may have been replaced before or after sale with a non-AGM battery supplied by Mitsubishi Motors Australia. A non-AGM battery was more likely to release hydrogen sulphide gas in the event of battery failure and acid could leak if the vehicle was involved in a collision. The spilling of acid or a gas leak increased the risk of injury to vehicle occupants. For the VINs of the recalled vehicles, please see REC-001686.

2020-22 Mitsubishi Outlander PHEV: remote keys may not have button battery warning

In March 2023, recall campaigns 010170 and 010171 were issued for 2020-22 Mitsubishi Outlander PHEV vehicles. Some remote keys supplied to consumers did not contain sufficient button battery warnings and, as such, did not comply with the mandatory labelling requirements for items containing button batteries. Consumers may therefore be unaware that the keys used button batteries and the risks posed to young children. If a young child ingested a button battery, they are likely to suffer severe internal burn injuries which could result in serious injury or death. Button batteries also pose a choking hazard. Owners were advised to contact their preferred Mitsubishi Motors dealer to check if the required warnings were present. For the VINs of the recalled vehicles, please see REC-005634.


Problems and faults: Mitsubishi Outlander PHEV

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Problems and faults: Mitsubishi Outlander PHEV

No troubleshooting information is currently available for the Mitsubishi Outlander PHEV.


Back To Top