Recalls: Nissan J32 Maxima
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Nissan J32 Maxima
- In November 2009, a recall was issued for Nissan J32 Maxima vehicles due to potentially incorrect routing of the curtain airbag strap. If incorrectly routed, the strap could cause displacement of the trim on the A-pillar (PRA 2009/11263). While there had been no reported cases of this occurring in Australia, the recall included vehicles in the following VIN ranges –
- 3.5-litre models: MNTBAUJ32A0000016 to MNTBAUJ32A0001416; and,
- 2.5-litre models: MNTBBUJ32A0000006 to MNTBBUJ32A0000669.
Problems and faults: Nissan J32 Maxima
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Nissan J32 Maxima
No troubleshooting information is currently available for the Nissan J32 Maxima.
