Recalls: Skoda 5J Fabia Combi
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Skoda 5J Fabia Combi
Skoda 5J Fabia Combi: 7sp DQ200 DSG and electrolytic corrosion
In March 2014, a recall was issued for 2013 model Skoda Fabia vehicles that were fitted with seven-speed DQ200 Direct Shift Gearboxes (DSGs). In these vehicles, sulphur in the gear oil and an inorganic heat stabiliser in the plastic parts of the mechatronic unit could cause metallic surfaces to suffer from electrolytic corrosion, particularly in conditions with high temperatures and humidity. Conducting particles could then settle between the circuit paths of the control unit and cause a short circuit and blow the gearbox fuse. If the fuse were to blow, the clutch would open and freewheel, resulting in a sudden and total loss of power to the wheels. Although other vehicle systems such as steering and braking would continue to function, the loss of power may pose a hazard to occupants and other road users. For the VINs of the recalled vehicles, please see PRA 2014/14013.
2013-15 model year Skoda 5J Fabia Combi: Takata driver’s airbag recall
In July 2018, a recall was issued for 2013-15 model year Skoda Fabia Combi vehicles. In these vehicles, the Takata-supplied driver’s airbag contained propellant wafers that could degrade over time due to the absorption of moisture. If the vehicle was in a collision that triggered the airbag, excessive internal pressure could cause the metal airbag inflator housing to explode/rupture, such that metal fragments would be projected through the airbag material and into the cabin – these metal fragments posed a serious risk of injury or fatality. For the VINs of the recalled vehicles, please see PRA 2018/16909.
2013-15 model year Skoda 5J Fabia Combi DSG: pressure accumulator crack and loss of power
In October 2019, recall campaign 35E1 was issued for 2013-15 model year Skoda 5J Fabia Combi vehicles. Due to a production fault, a crack in the transmission’s pressure accumulator (within the mechatronics housing) could occur. If the pressure accumulator cracked, oil and pressure would be lost in the hydraulic system of the gearbox. If this occurred, the transmission of engine power would be interrupted, similar to depressing the clutch in a vehicle with a manual transmission – this increased the risk of a collision and injury to vehicle occupants. For the VINs of the recalled vehicles, please see PRA 2019/17887. AustralianCar.Reviews understands that the recalled vehicles had seven-speed DQ200 DSG transmissions.
Problems and faults: Skoda 5J Fabia Combi
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Skoda 5J Fabia RS: 1.4 Twincharger (TSI) engine and stretched timing chains
In an autobild.de article published in April 2012, a Volkswagen employee admitted that its 1.4 ‘Twincharger’ TSI engine was susceptible to stretched timing chains. According to Volkswagen, worn stamping tools caused:
- The holes in the chain links to miss the targeted manufacturing tolerances; and,
- Small burrs on the chain links that would cause abrasive wear to the timing chain.
If the timing chain stretched, the change in the engine’s camshaft timing could cause the valves and pistons to collide such that the engine would have to be re-built or replaced. A common symptom of a stretched timing chain is a rattling noise from the engine bay (see video below).
It is understood that the manufacturing defect was rectified for post-2012 1.4 TSI ‘Twincharger’ engines, though Volkswagen has not identified the production dates or engine codes of affected engines. As such, the 132 kW 1.4 TSI CAVE/CTHE engine in the Skoda 5J Fabia vRS – and which was shared with the Polo GTi and Golf GT – may be susceptible to this problem. According to Volkswagen, the number of poorly manufactured chains was in the ‘low hundreds’.
