Recalls: Subaru SK Forester
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Subaru SK Forester
2019 model year Subaru SK Forester: PCV valve may fracture
In December 2019, recall campaign SRT 288 was issued for 2019 model year Subaru SK Forester vehicles. Over time, the aluminium positive crankcase ventilation (PCV) valve may fracture and this would allow the engine to draw an increased amount of engine oil – this could cause excessive exhaust smoke and a possible unexpected loss of engine power. If this occurred, there may be a collision or injury to vehicle occupants and other road users. For the VINs of the recalled vehicles, please see PRA 2019/17998.
Problems and faults: Subaru SK Forester
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Subaru SK Forester: USA recall due to power steering loss
In the United States, recall 19V-065 was issued for Subaru SK Forester vehicles that were manufactured from 27 December 2018 to 16 January 2019. In approximately 70 per cent of these vehicles, a connector inside the Electronic Power Steering (EPS) control unit may have small gaps in the plastic material moulding. Connector terminals inside the plastic moulding may therefore have inadequate isolation between the terminals and this could cause power steering assistance to be disabled.
For Australia, it is understood that Subaru is rectifying vehicles prior to delivery to customers.
