Recalls: Toyota XX10 Avalon
Overview
Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.
Recalls: Toyota XX10 Avalon
- In December 2004, a recall was issued for Toyota XX10 Avalon models produced from 2002 to 2004 due to a potential fuel leak caused by an assembly error which could result in pinching of the charcoal canister vent hose. In this condition, high vacuum in the fuel tank may cause a crease to develop in the upper surface of the tank (PRA 2004/7412).
- In May 2005, a recall was issued for Toyota XX10 Avalon vehicles due to potentially incorrect welding of the number 1 rear suspension arm. As a result, the arm could break at the bush housing weld area and affect the vehicle’s directional control (PRA 2005/7741).
- In November 2011, a recall was issued for Toyota XX10 Avalon models produced from 1 June 2004 to 31 March 2005 due to the insufficient application of an adhesive agent between the outer ring and torsional rubber damper of the crankshaft pulley – this could cause abnormal noises or sudden illumination of the of the charging system warning light. In rare cases, the belt for the power steering pump could become detached from the pulley, resulting in a sudden and unexpected increase in the amount of steering effort required. The recalled vehicles were in the VIN range 6T1 53X10# 06039846 to 6T1 53X10# 06043542 (PRA 2011/12898).
Problems and faults: Toyota XX10 Avalon
Overview
This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.
To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.
Problems and faults: Toyota XX10 Avalon
- Groaning and grinding noises from the front brakes can be fixed by replacing the brake rotors and installing special spacers.
- Power steering fluid leaks from seals may require a rebuild or replacement of the rack-and-pinion steering gear.
