Review

Review: Ford PJ Ranger cab chassis (2007-09)

3.5 stars

  • Responsive and frugal 3.0-litre turbo-diesel engines
  • Manual transmission works well
  • Impressive braked towing capacity
  • For super cab, useful in-cabin storage
  • Quiet, well-insulated cabin
  • Good ergonomics
  • Suspension lacks compliance
  • Vague steering
  • For dual cabs, limited rear seat legroom
  • Large turning circle for 4×4 models

Review: Ford PJ Ranger cab chassis (2007-09)

Overview

Released in March 2007, the Ford PJ Ranger cab chassis was available in single cab, Super Cab and Crew cab bodies and with rear or four-wheel drive. The single cab was available with a 2.5- or 3.0-litre common-rail, direct-injection turbo-diesel engine, though the Super and Crew cabs were solely available with the latter.

The PJ Ranger had an overlapped, cross-braced ladder frame with fully independent double wishbone front suspension and dual rate semi-elliptic leaf spring rear suspension. The rear-wheel drive models were also available as High Rider variants which had increased ground clearance. The four-wheel drive models had a ‘shift on the fly’ function and electronic remote front wheel hub locks. The High Rider and four-wheel drive models were also fitted with a limited slip rear differential.

Ford PJ Ranger cab chassis specifications
Body Engine Drive Variant Trans. Peak power Peak torque
Single cab 2.5-litre turbo-diesel I4 RWD XL 5sp man. 105 kW at 3500 rpm 330 Nm at 1800 rpm
3.0-litre turbo-diesel I4 RWD XL 5sp man. 115 kW at 3200 rpm 380 Nm at 1800 rpm
XL High Rider
4WD XL 5sp auto,
5sp man.
Super (extended) cab 3.0-litre turbo-diesel I4 RWD XL High Rider 5sp man. 115 kW at 3200 rpm 380 Nm at 1800 rpm
4WD XL
Crew (double) cab 3.0-litre turbo-diesel I4 4WD XL 5sp man. 115 kW at 3200 rpm 380 Nm at 1800 rpm

Safety equipment

Standard safety equipment included dual front airbags, while all models other than the single cab XL variant – which had bench seats – were also fitted with front seatbelt pretensioners and load limiters. A load-sensing proportioning brake valve – used to control rear braking pressure for improved braking effectiveness under varied load conditions – was also fitted as standard.

ANCAP crash testing

In ANCAP crash testing , the closely-related 2008 Mazda BT-50 4WD dual cab utility – fitted with a 2.5-litre turbo-diesel engine – received a three star adult occupant protection rating with a score of 22.46. Due to its substantial similarities, this score was also applied to the equivalent Ranger model. In the offset crash test, the integrity of the passenger compartment was compromised; protection from serious leg injury was poor for the driver, while chest and upper leg protection was marginal for the driver. A default score was awarded in the side impact test.

Features

Standard features for the Ranger XL included 15-inch steel wheels, a two speaker radio with single-disc CD player and MP3-compatibility, a tilt adjustable steering wheel and 12 volt power outlet.

For the single cab XL variants, air conditioning was not standard, but was fitted where optional bucket seats and/or the optional automatic transmission were selected. The single cab XL variants also had vinyl floor covering whereas all other models had cloth floor covering.

From November 2007, the Ranger was fitted with power windows and mirrors, remote central locking and an immobiliser as standard.

Related links

Back To Top