- Powerful 6.0-litre L98 V8 engine
- Impressive dynamics
- Spacious interior with supportive seats
- Accurate, well-weighted steering provides excellent feel
- 3.6-litre LY7 V6 engine lacks refinement
- Thick A-pillars impair forward visibility
- Awkward handbrake position and operation
- High fuel consumption
Overview
Released in March 2008, the HDT VC Retro was based on the Holden VE Commodore SV6, SS or SS-V variants but fitted with an extensive after-market package developed by HDT. The Group II variants were based on the VE Commodore SV6 variants and powered by 3.6-litre Alloytec V6 engines which had aluminium construction, double overhead camshafts, four valves per cylinder, variable camshaft phasing (for the inlet and exhaust camshafts), a dual stage intake manifold and a compression ratio of 10.2:1.
The Group III and Group IV variants, however, were based on the SS and SS-V variants and powered by the 6.0-litre L98 V8 pushrod engine which had all-aluminium construction, flat-topped pistons, two valves per cylinder, external knock sensors and a compression ratio of 10.4:1. For the VC Retro, however, performance modifications included an HDT cat-back exhaust system which included HDT extractors and twin three-inch stainless exhaust tips.
The VC Retro was 4988 mm long, 1899 mm wide, 1416 mm high and had a 2915 mm long wheelbase. Like the VE Commodore SS, the VC Retro had double-pivot MacPherson strut front suspension and four-link, independent rear suspension. For the VC Retro, however, HDT fitted its Dynamically Enhanced Sports Suspension package.
TThe VC Retro was the first of HDT’s VE Commodore-based ‘Heritage Series’ models, with the VH Retro following in October 2008. Visually, the VC Retro could be identified by its white, red or black paint finishes, side stripes, 19-inch Irmscher-look alloy wheels, HDT grille emblem, rear bumper spats and decklid spoiler. Inside, there were specially tailored seats featuring HDT embroidery that sought to provide a modern interpretation of the Herringbone trim in the original HDT VC Commodore.
HDT VC Retro 30thAnniversary
In October 2010, 30th Anniversary editions of the VC Retro were released to commemorate the thirtieth anniversary since Peter Brock became Team Principal of the Holden Dealer Team (HDT). The 30th Anniversary editions were limited to a run of thirty vehicles. Engine modifications for the 30th Anniversary editions included an HDT-engineered camshaft with 1 7/8-inch headers, cool air inlet, a ceramic-coated twin 3-inch exhaust system and a recalibrated ECU. The six-speed T-56 Tremec manual transmission was retained from the Commodore SS.
Visually, the 30th Anniversary editions could be identified by their Firethorn Red paint finishes and grille badges. Inside, the 30th Anniversary models had four seats with combination leather/suede trim trim, carbon fibre dashboard trim and a triple gauge cluster.
| Base | Variant | Engine | Trans. | Peak power | Peak torque |
|---|---|---|---|---|---|
| SV6 | Group II | 3.6-litre LY7 petrol V6 | 6sp man. | 195 kW at 6500 rpm | 340 Nm at 2600 rpm |
| SS | Group III, Group IV |
6.0-litre L98 petrol V8 | 6sp man. | 280 kW at 5700 rpm (est.) | 530 Nm at 4400 rpm (est.) |
| SS-V | Group III Stage 2, Group IV Stage 2 |
6.0-litre L98 petrol V8 | 6sp man. | 280 kW at 5700 rpm (est.) | 530 Nm at 4400 rpm (est.) |
| SS-V | 30th Anniversary | 6.0-litre L98 petrol V8 | 6sp man. | 350 kW at 6000 rpm (est.) | 610 Nm at 4000 rpm (est.) |
Safety equipment
As per the post-March 2008 Holden VE Commodore SS, standard safety equipment for the VC Retro included dual front airbags, front seat-mounted side airbags, full-length curtain airbags, ABS, electronic brake force distribution, brake assist, electronic stability control, traction control and front seatbelts with pretensioners and load limiters.
Features
As per the Holden VE.I Commodore SV6, standard features for the VC Retro included a seven speaker sound system with a CD player, MP3-compatibility and auxiliary inputs, Bluetooth mobile phone connectivity, a four-way power adjustable driver’s seat, air conditioning, cruise control, front fog lights, automatic headlights, leather-wrapped multifunction steering wheel, remote central locking, power windows and mirrors, height and reach adjustable steering wheel, a 12 volt power outlet, trip computer and an immobiliser.
The VE.I Commodore SS-based models were further equipped with a six-stack CD player and limited slip rear differential. Beyond this, the SS V-based models were further equipped with an eleven speaker sound system, dual-zone climate control air conditioning, projector headlights and a leather-wrapped gearshift lever.
For the Holden VE.II Commodore SS, standard features were extended to include a ‘Holden-iQ’ system with enhanced Bluetooth mobile phone connectivity, Bluetooth audio streaming and touch-screen dialing, as well as dual-zone climate control air conditioning. Beyond this, the VE.II Commodore SS-V gained a full-colour navigation system with voice control and real-time traffic information, a reversing camera and rear parking sensors.
Related links
