Azure – Australian Car.Reviews https://www.australiancar.reviews Sun, 07 Mar 2021 22:46:16 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 Review: Bentley Mk.2 Azure (2007-09) https://www.australiancar.reviews/review-bentley-mk-2-azure-2007-09/ Sun, 07 Mar 2021 22:46:16 +0000 http://prod.australiancar.reviews/review-bentley-mk-2-azure-2007-09/ 3 stars
  • Powerful 6.8-litre twin-turbo V8 engine
  • Comfortable ride
  • Sumptuous interior
  • Open-top appeal
  • Weight blunts agility
  • Poor fuel economy
  • High maintenance costs

Review: Bentley Mk.2 Azure (2007-09)

Overview

Released in 2007, the Bentley Mk.2 Azure was a two-door, four-seat convertible with a soft-top roof. Manufactured in Crewe, England, the rear-whell drive Azure was powered by a 6.8-litre twin-turbo V8 petrol engine. In October 2009, the Azure range was expanded with the introduction of the more powerful Azure T.

The 6.75-litre pushrod V8 engine had an aluminium-silicon alloy block, two low-inertia Mitsubishi turbochargers, two valves per cylinder and a compression ratio of 7.8:1. A six-speed ZF automatic transmission – with selectable Drive, Sport and Semi-Automatic modes – was standard across the range.

Based on the Arnage platform, the Mk.2 Azure was 5410 mm long, 1915 mm wide, 1492 mm tall and had a 3116 mm long wheelbase. The Azure, however, was also fitted with carbon-fibre, under-floor cross braces to stiffen the body, while its hydraulically-operated soft-top roof which could be opened or closed in 30 seconds. Furthermore, the Azure had double wishbone suspension front and rear with electronically-controlled dampers.

Bentley Mk.2 Azure specifications
  Years Engine Trans. Peak power Peak torque
Azure 2007-09 6.8-litre twin turbo petrol V8 6sp auto 336 kW at 4100 rpm 875 Nm at 1800 rpm
Azure T 2009 6.8-litre twin turbo petrol V8 6sp auto 373 kW at 4200 rpm 1000 Nm at 3200 rpm

Safety equipment

Standard safety equipment included dual front airbags, front and rear seat-mounted side (thorax) airbags, ABS, electronic brake force distribution, brake assist, electronic stability control, traction control and front seatbelts with pretensioners and load limiters.

The Azure was also fitted with ventilated front and rear disc brakes, measuring 348 mm at the front and 345 mm at the rear.

Features

Standard features for the Azure included 19-inch alloy wheels with 255/45 Pirelli P-Zero tyres, a ten speaker audio system with a six-disc CD player, dual-zone climate control air conditioning, satellite navigation, power adjustable front seats with memory settings, heated front seats, leather upholstery, cruise control, bi-xenon headlights with washers, front and rear parking sensors, Bluetooth mobile phone connectivity, remote central locking, power windows and heated mirrors, power retracting mirrors, an electrochromatic rear view mirror, 12 volt power outlets, a trip computer, an alarm and immobiliser.

The Azure T was further equipped with 20-inch five-spoke alloy wheels with 255/40 Pirelli P Zero tyres. Visually, the Azure T was distinguished by its ‘Le Mans’ lower front wing air vents, dark-tinted mesh grille and a billet aluminium fuel filler cap.

Brochures

Related links

]]>
53116
Recalls & faults: Bentley Mk.2 Azure (2007-09) https://www.australiancar.reviews/recalls-faults-bentley-mk-2-azure-2007-09/ Sun, 27 Dec 2020 23:16:02 +0000 http://prod.australiancar.reviews/recalls-faults-bentley-mk-2-azure-2007-09/

Recalls: Bentley Mk.2 Azure

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Bentley Mk.2 Azure

  • In February 2007, a recall was issued for Bentley Azure vehicles manufactured between February 2005 and August 2006. In these vehicles, the wheel bolt could potentially loose and cause the affected wheel to become detached from the hub (PRA 2007/9051).


Problems and faults: Bentley Mk.2 Azure

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Problems and faults: Bentley Mk.2 Azure

No troubleshooting information is currently available for the Bentley Mk.2 Azure.


]]>
46491
Images: Bentley Mk.2 Azure (2007-09) https://www.australiancar.reviews/images-bentley-mk-2-azure-2007-09/ Wed, 04 Nov 2020 08:29:29 +0000 http://prod.australiancar.reviews/images-bentley-mk-2-azure-2007-09/ Images: Bentley Mk.2 Azure (2007-09)

Released in 2007, the Bentley Mk.2 Azure was a two-door, four-seat convertible with a soft-top roof. Manufactured in Crewe, England, the rear-whell drive Azure was powered by a 6.8-litre twin-turbo V8 petrol engine. In October 2009, the Azure range was expanded with the introduction of the more powerful Azure T… Read full Bentley Mk.2 Azure review


]]>
44548